Amplifi Router

In this article, we'll review how to install an Amplifi router from Sitoo.

1. Connect the internet cable to the blue port on the back of your router.
2. Connect the other end of the internet cable to your internet source.
3. Connect the power cord to the smallest port in the lower right corner on the back of your router, and connect the other end to the wall socket.
   
   
4. Wait a moment until you receive a sound from the router.
5. Look at the screen and see if there's and updates required. If so, please press Update.
6. Wait a moment until you receive a sound from the router. 
7. Tap once on the screen to inspect the name of the network that you've connected the router to during step 1 & 2.
8. Now connect your computer or iPad to the same network. 
9. At this point a dialogue will appear on your computer screen where you will be able to name the router network and also set a password.
10. We recommend that you name your network to something along the lines of Sitoo_POS... This will make it much easier for the store personnel to locate the network.
11. Leave ”Use the same password for administration” marked as it is.
12. Enter the network and password, then press Save and Continue.
13. You will be automatically forwarded and able to connect to the correct network. 
14. Your router is now configured and ready to be connected to Sitoo POS.
    
    

    Låsa IP-adresser

    1. Go to the App Store and download the app 'AmpliFi WiFi'.
    2. Enter AmpliFi WiFi in the search field and download the app.
    3. Make sure that the iPad/iPhone is connected to the Amplifi network, the same as your other hardware is connected to.
    4. Select the option continue on the first image.
    5. Select 'I already have configured AmpliFi'.
       
       
    6. Open the app and tap 'Clients' in the left corner.
       
       
    7. In the section 'Clients Connected' you'll have a list similar to this one:
       
       
       
    8. Tap your finger on the device that you want to Lock. You will den receive this image: 
       
       
       
    9. Select 'Create static lease' in the left corner.
       
    10. Replace the name with something that describes the devices, such as Card Terminal1 or Receipt Printer1 etc.
    11. Tap the check icon in the upper right corner to save you changes.
        

    Repeat the steps above for all the devices whose IP you want to lock.